1Pair Sfp Media Converter Gigabit Mini10/100/1000Mbps Fiber Optical Ethernet Switch 1SFP1E 1F1E(1 Pair)

Signal Converters Note: This does not include the SFP module Overview This 10/100/1000M Gigabit Ethernet converter is used in trunk network transmission and is mainly used for Gigabit Ethernet device links. Converts optical-electrical Ethernet signals between 10/100/1000M UTP (TX) interface and 1000M SFP (FX) connector. According to customers' requirements, this media converter supports single-mode and multi-mode fibers with a transmission distance of up to 80km for single-mode fiber and 550m for multi-mode fiber. Extend the transmission distance across your conversion network. The media converter leverages intelligent connection technology to provide automatic negotiation, thus eliminating the need to manually configure or monitor settings. Key Features * Modular design and play * Meets IEEE 10/100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-SX/LX standards * Auto-negotiation feature allows UTP ports to automatically select 10/100/1000M and Full Duplex or Half Duplex * Available in single fiber WDM versions: 1310/1550nm wavelengths are used * Supports automatic crossover of twisted pair ports * Alarm LED lights up to indicate link failure; status LEDs make monitoring device status easy Technical specifications Parameters budget Standards IEEE802.3z 1000Base-SX/LX, IEEE802.3ab 1000Base-T Gigabit Ethernet IEEE802.3u,100Base-TX, IEEE 802.3 10Base-T Wavelength Multi-mode: 850nm Single-mode: 1310nm, 1550nm Transmission Distance Fiber: Multimode: 550 m (fiber size: 50/125 m) Single-mode: 10/20/50/80 km (fiber size: 8.3/125, 8.7/125, 9/125 or 10/125 m) UTP: Cat 5e or cat. 6:100m Port 2 RJ45 ports, one SFP MDI/MDI-X Auto Selection LED indicator PWR: Illuminated for normal operation ALM: Illuminated when fiber or copper bond failure occurs LNK/ACT: Fiber link Lights up when link pulses are received from compatible devices, flashes when data packets are transmitted/received Power Supply Outdoor:DC 5V 2A Built-in: 100V to 240V AC 50Hz to 60Hz Operating Temperature 0°C to +70°C Storage temperature -20°C to +80°C Storage Humidity 5% to 90% (non-condensing) ========== Wireless Function: Yes Chemical highly concerning: None Transfer rate: 10/100/1000Mbps

• Signal Converters